Tuesday, June 28, 2016

Plumbing Maintenance Not a Bad Idea

Plumbing Maintenance And Repair

When homeowners face some of the smaller plumbing problems, if they’re handy around the house, they will often be able to sort out the problem on their own. When it comes to bigger plumbing problems, it’s usually best to call out a plumber. Look for professional plumbers in your area, as they will have experience with common plumbing problems in your neighborhood.

When homeowners try and deal with complicated plumbing problems on their own, it could lead to an even bigger problem that will ultimately cost them more money than if they just got a plumber in to repair the original problem. Find out more about when it’s best to phone up a professional for the job. clogged drains

Plumbing Maintenance

Having regular maintenance on your plumbing won’t cease plumbing problems, but it will help in preventing them from occurring. Many pipes are behind walls or under the floor. Without an inspection, when a plumbing problem arises, there is often no way of noticing it before it turns into a larger problem. Plumbing problems often involve leaks, and if these go unnoticed or ignored, they can lead to water damage and affect your home’s structure. Water damage can also cause mold to grow, and it can discolor and warp any wood in your home that was affected. By getting a thorough inspection and maintenance check on your home’s plumbing system, you can prevent the negative problems from materializing.

There are some maintenance tasks that homeowners can carry out themselves, such as checking any visible pipes in their home for signs of corrosion, damage or dampness and flushing the toilets to ensure there are no leaks in the base. They can also check the water pressure by turning on the sinks, showers, and bathtubs faucets – they should have a similar and even flow, and homeowners can also check for any potential clogs by filling up their sinks and then letting the water drain out. If the water moves slowly, this could be a sign of a clog in the making.

It is always best to call in a plumber for a thorough maintenance check. Plumbers will know exactly what they are doing and what warning signs that they need to look out for. Most plumbing inspectors will check your garbage disposal, your water heater, detect any hairline leaks by using a pressure test, maximize the flow rate by using a drain treatment, and thoroughly check all of the plumbing systems in your home. A more intense inspection may also include lead testing and inspection of pipes using video.

Common repair jobs for plumbers

Leaking Pipes
Leaks are a very common plumbing problem that should not be ignored. In some cases, they may not be noticeable until an inspection is carried out or until water damage is visible. Most of the time leaks develop at the pipes joints. You can buy temporary fixes such as joint fillers at your local hardware store, but it’s best to get a plumber out to repair the problem.

It may cost you more money than buying joint filler but a repair carried out by a plumber is not temporary, the joint filler is. Some time or another you’re going to have to spend the money on a proper repair – better sooner than later. Some pipe repairs such as a leaky U-bend aren’t complicated, but they can be chaotic if they are done wrong. You can use products such as leak tape to temporarily stop the leak while you are waiting for your plumber to arrive.

Dripping Faucets
When your home has a drippy faucet, it’s quite easy to ignore it as long as the dripping noise isn’t keeping you up at night. A lot of homeowners will be surprised at the amount of water you waste when a faucet is trickling all day. If you want to see how much water you are wasting, place a jug or bowl under the affected faucet for the day. After you have taken note of the amount you’ve collected, you could put the wasted water to good use by boiling it for a cup of coffee or using it to water any plants. A drip doesn’t just waste water; it also wastes your money.

Low Water Pressure
You can tell if you have low water pressure by turning on a faucet and monitoring its water flow. If the water is trickling out, it’s very likely that you have low water pressure. Low water pressure isn’t always due to a problem in your home’s pipes; it can also be caused by the municipal water supply.

Slow or Clogged Drain
When you have run water into your sink or bathtub, and it’s draining slowly, you could have the beginnings of a clog. A quick plunge may dislodge the clog a little, but it doesn’t break the clog up. It’s not advised to use over the counter drain cleaners as these can damage your pipes. It can cause plastic pipes to soften and copper or lead pipes to corrode. When you are dealing with a clog, it’s always best to leave it to the professional plumber.

All of our trucks are fully equipped so we can immediately handle all repair issues – all makes and models!

AC Contractors Fort Worth and Weatherford, Burleson, Aledo, Granbury

Call Lightfoot Plumbing @ 817-596-0309

The post Plumbing Maintenance Not a Bad Idea appeared first on Lightfoot Plumbing.



from Lightfoot Plumbing http://lightfoot-plumbing.com/2016/06/28/plumbing-maintenance-not-bad-idea/
via http://lightfoot-plumbing.com

Monday, June 20, 2016

Garbage Disposal Repair Services

Garbage Disposal Repair Services | Weatherford Plumbing Contractors

Are you having an issue with your garbage disposal? Is there weird grinding noises or smoke coming from the unit? Are you experiencing a non-start situation where the disposal won’t turn on? Find a professional that works on garbage disposals to take care of these issues. DCPlumbingContractors.com recommends our featured plumbing contractor, specializing in a wide range of repair and replacement services.Troubleshooting Your Garbage Disposal Issues

A professional plumber can easily visit your home and provide you with garbage disposal repair services. However, before you call a plumber to your home, you should consider taking a few steps to troubleshoot your garbage disposal. If your garbage disposal has stopped working altogether, you can push the reset button that is located on the garbage disposal underneath your kitchen sink. If your garbage disposal is clogged, you can use the plunger to try to remove large chunks of food waste that have become lodged in the disposal or pipes. Once the water begins to flow back down the drain, you can turn the faucet and disposal on to encourage the disposal to grind the food waste up into smaller pieces.When These Troubleshooting Efforts Don’t Fix Your Issue

These troubleshooting efforts often will resolve many garbage disposal issues, but there are times when the services of a professional plumber are needed to repair the garbage disposal. While a plumber may be able to assist with repairs for your garbage disposal, it may be more cost effective in certain situations to install a new garbage disposal. A professional plumber can assist with the removal of your current appliance and the installation of a new one. You may purchase your own garbage disposal, or your plumber may provide one for you.

When your garbage disposal is not functioning, your life can be inconvenienced. If the disposal has created a clog, you may not be able to use your kitchen sink until it is repaired. With this in mind, consider taking a few steps today to troubleshoot your system on your own, and call for professional plumbing services if needed.

Many people make regular use of their home’s garbage disposal for convenience in their daily life. A garbage disposal is designed to grind up food waste into very small pieces. These pieces can then easily be removed from the home view pipes. This is a preferred method for rinsing off dishes and disposing of food waste for many people as it is fast, easy and minimizes odors associated with the use of the trash can for food waste disposal. However, a garbage disposal may develop issues over time. It may become clogged and prevent waste and water from going down the pipe. It may quit working altogether, or it may develop a loud sound that indicates it is not working properly.A premier provider of plumbing & HVAC services in the Washington DC Metro region.Click the button above to schedule service with Spartan Plumbing.Have a good plumber you would like to recommend? If so, send us the business information for consideration.

The post Garbage Disposal Repair Services appeared first on Lightfoot Plumbing.



from Lightfoot Plumbing http://lightfoot-plumbing.com/2016/06/20/garbage-disposal-repair-services/
via http://lightfoot-plumbing.com

Thursday, June 9, 2016

Plumbing Repair DIY

Plumbing Repair DIY

Smaller repairs are ok to do, but don’t talk the larger issues by yourself.

If you have replaced the washer in a leaky tap but it continues to drip,look at the valve seat for signs of wear–scratches, pits or an irregular surface. Employ a flashlight to illuminate the interior of the tap and, as a further check, runt the top of a finger around the edge of the seat.

Most faucet seats are remove able, and it is better to replace a damaged seat than to try to smooth a worn one. Employing a seat wrench, turn the seat counterclockwise and lift it out. Take it to your plumbing supply store to get a precise duplicate. Lubricate the exterior of the replacement with a pipe-joint compound, push it firmly into the seat wrench and screw it into the faucet body.

If a worn valve seat can’t be removed–it might be built into the faucet–its surface must be ground smooth with a valve-seat dresser. Use the largest cutter that fits the tap body. Screw on a guide disk that just fits the valve-seat hole. Slide the cone down nicely into the threads of the tap body. Pressing down gently, turn the handle clockwise several times. Take away the filings with a humid cloth.

The most trustworthy method you can use for sealing a faucet stem is replacing the packing washer. A dribble round the stem of a tap when the water is running can frequently be stopped simply by tightening the packing nut–but don’t over tighten it. If the stem leak continues, the packing should be replenished. Packing comes either as graphite washers or as self-forming packing, a graphite impregnated twine. Some modern faucets use O-rings or cork gaskets for packing.

To replace a packing washer, remove the handle and packing nut, clean out the old packing and slip on the new. For an old tap that used self-forming packing, you can find a pre-made packing washer that fits. Push the packing washer onto the stem so far as it’ll go, and screw the nut over it, turning it clockwise.

Call Lightfoot Plumbing, it’s a smart Choice

Most owners who have resided in their house for over some years develop the basic plumbing and repair skills important to look after tiny maintenance jobs. If the john clogs or a tiny leak develops in a pipe, you’ll take pride in your capability to fix things without help from a professional plumber. And that is’s a good thing, too ; by looking after your own small plumbing repairs, you save your folks hundreds of greenbacks, add to the cost of your home, and get a feeling of satisfaction in knowing that you can maintain your own home.

Plumber
While completing your own repairs could be a smart idea for little plumbing Problems, it can actually turn out to be a particularly bad thing to try on major, significant upkeep jobs in your home. Take, for example, replacing a hot water heater. While some homeowners might have the experience to do this themselves, the overwhelming majority should only depend on a professional plumber to take care of a job this big. For time consuming, in-depth plumbing repair jobs, making an attempt to teach yourself just to save a couple of bucks could actually finish up costing you more in the future.

The most perilous situation that would arise from attempting your own big plumbing projects is a probability of physically injuring yourself or a member of your folks. While the possibilities are remote, you should never risk injuring yourselves or your loved ones by attempting to repair or replace a hot water heater, gas line, water line or other large units. Without the correct tools, coaching and manpower, some of these jobs can finish up being much more dangerous than you may think. If there is any doubt in your intellect about the safety of a plumbing project, pull out the yellow pages and call Dallas Plumber.

A second, less devastating result of performing your own plumbing repairs is pricey damage to your property. There are plenty of examples of overzealous homeowners who caused thousands of dollars worth of damage to their property because they did not want to pay a plumber to solve the problem. Particularly when dealing with gas lines, water lines and sewer lines, do not attempt any important repairs or replacements without first contacting a pro plumber.

You should be happy with your ability to repair little plumbing Problems that will happen in your house, but do not let stubbornness keep you from calling in a professional for jobs you can’t handle alone. Regardless of how new or well cared for your house is, it’ll eventually experience a maintenance problem that will require an expert plumber to make a visit. By spending a few greenbacks now, you could save hundreds or even thousands with a repair job that’s far less likely to fail or cause damage to your house.
More Information Here:

The post Plumbing Repair DIY appeared first on Lightfoot Plumbing.



from Lightfoot Plumbing http://lightfoot-plumbing.com/2016/06/09/plumbing-repair-diy/
via http://lightfoot-plumbing.com

Thursday, June 2, 2016

Clogged Drains

Fort Worth Plumbing – What Tool To Use To Remove Drain Clogs?

Signs Of Serious Plumbing Problem By Lightfoot Plumbing.

Almost everybody knows how annoying a clogged drain or a stopped up toilet can be. Clogged drains and clogged toilets are one of the most common occurrences in a home. Fortunately , a plumber’s snake can be a great gizmo to have in the event of a plugged drain. clogged Drains and Pipes

A plumbing snake is a flexible auger used to get rid of clogs in pipes that cannot be removed with a plunger. Most snakes contain a coiled metal wire with space between the coils at the end. The other end is attached to a device with a crank that revolves the wire as it moves down into the pipe.

The auger end of the wire digs into the block very like a corkscrew, allowing recovery of the item creating the clog when the snake is pulled out. Also, a clog can be removed when the end of the snake breaks up the clog, allowing it to pass thru the drain. Before employing a plumbing snake, it is critical to understand ways to use one.

The following is a guide on the easy way to use a plumbing snake :

1. Set Up : Before employing a plumber’s snake, make sure you have towels and a bucket to gather any water which will run over on the floor. Put on gloves because the snake wire can get grimy and slimy.

2. Access the Drain : Remove the drain cover

3. Feed in the Plumbing Snake : start with the smallest snake that you have. If it does not work, employ a larger one. Feed the snake’s head into the drain. Revolve it a bit in a clockwise direction as you slide it thru the pipe. Be careful not to damage sinks, toilets, and pipes.

4. Locate the Clog : Keep feeding in the snake while rotating till you hit the blockage. Keep repositioning the grip within a couple of inches of the entry way to the pipe as you feed the snake into the drain.

If you cannot locate the obstruction, run the snake in thru the branch pipe. If there does not appear to be a block in the branch pipe, the blockage might be in the main waste and vent stack, or in the sewer line. You will have to call a plumber.

5. Collect the block : when you have reached the blockage, revolve the head of the snake till you can feel it latch on to the block. Once you have a good hold, withdraw the snake out of the drain. You may push the snake and chew away at the clump until the snake is driven thru it. If it’s a thick and solid clump, then use the snake to gnaw away at the clog. When you pull the blockage back, it may start to become untidy. This is where a bucket and towels becomes obligatory.

6. Eliminate Remaining waste : you will have to get rid of the leftover pieces in the drain. You can do this by running hot water down the drain for a couple of minutes to bathe away any remaining debris.

Now having said all this some times the “do it yourself” method doesn’t help much and you need to call a Professional Plumber! So don’t hesitate and give us a call if the job is bigger then your ambitions.

The post Clogged Drains appeared first on Lightfoot Plumbing.



from Lightfoot Plumbing http://lightfoot-plumbing.com/2016/06/02/clogged-drains/
via http://lightfoot-plumbing.com